Pottery Wheel Experience
A beginner-friendly pottery wheel session where you try making pottery on the wheel with guidance from an instructor. You’ll learn the basics and get hands-on time to shape clay on the wheel.
Join if – You want to try the pottery wheel and enjoy a fun, hands-on experience.
2 hours
INR 1900 + Taxes / Person
Fri to Wed | 11:30–13:30 & 15:00–17:00
14 Years+
Materials & apron.
Firing, Glazing and shipping charges of the piece made in the workshop.
About the workshop
The session begins with a short, easy introduction where the instructor walks you through the basics of the pottery wheel and shows you how it works. Once the demonstration is done, it’s your turn. Each participant gets their own pottery wheel, giving you time and space to practice at your own pace. You’ll spend the rest of the session exploring the wheel, shaping clay, and getting a feel for the process. The instructor stays with you throughout — offering guidance, small tips, and gentle corrections whenever you need them.
What You’ll Make
During the session, you may create 2–3 small pieces.
Results can vary, as it’s your first time — and that’s completely okay.
The focus is on experiencing the wheel and enjoying the process.
Taking Your Pieces Home
Pottery requires time to dry slowly before it can be fired in the kiln, glazed, and fired again. Because of this process, pieces cannot be taken home on the same day.
Drying, Glazing & Shipping
If you would like to keep your pieces, drying, glazing, and firing can be added later at an additional cost of INR 500 + taxes per piece.
Finished pieces can either be collected from the studio after approximately 10 days or shipped to your address anywhere in India at an additional cost of INR 300 + taxes per piece.
You can decide whether you would like to keep your pieces after completing the workshop
Good to Know
Please arrive 10–15 minutes before the session starts
Wear clothes you don’t mind getting a little messy
Short nails are recommended for wheel work
No prior pottery or art experience is required
FAQs
What is the refund policy?
What is the refund policy?
A 50% refund is available for cancellations made at least 48 hours before the workshop. Unfortunately, cancellations made within 48 hours of the workshop are non-refundable.
What if breakage happens during firing or shipping?
What if breakage happens during firing or shipping?
Ceramics are fragile, and although uncommon, breakage can occasionally occur during firing or shipping.
In the rare event that a piece breaks during firing or transit, we offer a full refund of the glazing, firing, and shipping charges (₹800 per piece). Workshop or experience charges are non-refundable.